Lifting jack
Typ
e
: KAL 275
hinged
Art. N
o
.
4031549
12373
4
Structure and
use guidance
The lifting jack serves for lifting or lowering components and loads with assembly works on building sites.
With the lifting jack e.g. steel girders or wood purlins can be millimeter-exactly aligned.
The weight is turned up or down by means of crank within selflocking spindle transmission.
The lifting jack is equipped with swivel rollers, so that the weight can be brought exactly into the
correct position.
Technical data:
Height of heading fork
.......:
1,10 m bis 2,75 m
dimensions
with adapter
..................
.
.....:
1,36 m bis 3,00 m
(load arm down)
.....:
1,57 m x 0,73 m x 1,64 m
light mass heading fork
.....:
36 cm x 21 cm x 11,5 cm
weight completely
....:
86 kg
load-bearing capacity
........:
600 kg
crank, adjustably...
...:
Art.-Nr.
4031549
12361
1
General note
:
Only components in perfect status
and original equipment
may be used.
The lifting jack is to be used
only according to the intended
purpose.
The rules for the prevention
of accidents are to be observed.
1
heading fork
load arm
load loop
spindle transmission
height
:
1,11 m bis 2,75 m
props
3
spindle
underframe
stand
height
:
1,36 m bis 3,00 m
a
dapter
Art. Nr.:
4031549
12374
1
2
02054
