2.4 Crankshaft transport locking device
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Torque wrench, 10–60 Nm
F30452769
1
Torque wrench, 60–320 Nm
F30452768
1
Ratchet bit
F30027340
1
Engine oil
Transport locking device
Note:
The locking device on both ends protects the crankshaft bearings from shocks and vibration damage during
engine transport.
Observe the following instructions for removal and installation of the trans-
port locking device:
1.
When installing the engine on site, leave the transport locking device installed on both sides of the engine as
long as possible.
2.
Never start or bar the engine with the crankshaft transport locking device installed. If the generator is al-
ready mounted on the engine, ensure that the transport locking device of the generator is removed.
3.
Prior to every engine transport, reinstall the transport locking device on both sides according to the instruc-
tions. If the engine is to be moved together with the generator, install the transport locking device of the
generator.
4.
Always use the screws supplied with or installed in the transport locking device to secure it.
Installing the transport locking
device on driving end (KS)
1.
Remove screws (2) and washers (2).
2.
Remove guard plate (3) from flywheel hous-
ing (4).
MS15065/01E 2019-01
| Transport | 29
TIM-ID: 0000035999 - 005
