MTU 12V4000C*5 series, Operating Instructions Manual

Page: 206 / 305

8.13.3 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑
Engine is at operating temperature.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use Part No. Qty.
Torque wrench, 10–60 Nm
F30452769 1
Torque wrench, 60–320 Nm
F30452768 1
Torque wrench, 300–800 Nm
F30047798 1
Ratchet bit
F30027341 1
Ratchet bit
F30450902 1
Engine oil
Sealing ring
(→ Spare Parts Catalog)
WARNING
Oil is hot.
Oil can contain residue/substances which are harmful to health.
Risk of injury and poisoning!
• Allow the product to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves and goggles/safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Oil change without semirotary hand pump: Draining engine oil at drain
plug(s) on oil pan
1. Provide a suitable container in which to collect the engine oil.
2. Remove drain plugs (1) on driving and free
end and drain engine oil.
3. Fit drain plugs (1) on driving and free end and
with new sealing ring.
204 | Lube Oil System, Lube Oil Circuit | MS15041/03E 2018-08
TIM-ID: 0000037912 - 006