MTP MTP 3100 Instruction Sheet Download Page 1

Page: 1 / 2

LINKING THE ENERGY MONITORING SYSTEM

MTP 3100

(Instruction Sheet)

COMPONENTS

      Transmitter                  Monitor

Remove plastic tab on TRANSMITTER

(Found on back of transmitter)

Power the MONITOR with batteries OR using

the power adaptor

IMPORTANT

  During the Linking process, STEPS #5 and #6 must be
  performed seconds apart.

Begin by activating the signal search on the monitor,

  followed soon after by activating the signal search on
  the transmitter. The signal search on the monitor has a
  duration of 1 minute.

IMPORTANT

  During the Linking process, STEPS #5 and #6 :
  Keep the Monitor and Transmitter as close as
  possible.

Press and hold down the linking button on

the MONITOR for approx. 5 seconds, until
the LED light starts blinking then release the
button.

Press and hold down the linking button on the

    front of the TRANSMITTER for 15 seconds, then
    release. A red LED will flash rapidly on the
    transmitter during the linking period.

SUCCESSFUL linking is demonstrated by an antenna

in the top left corner of the screen. FAILED Linking will
not display an antenna on the left corner of the screen.

PASS

FAIL

Note :

During the linking process, keep the transmitter as close as possible to the monitor.

Summary of Contents for MTP 3100

Page 1: ...nute 4 IMPORTANT During the Linking process STEPS 5 and 6 Keep the Monitor and Transmitter as close as possible 5 Press and hold down the linking button on the MONITOR for approx 5 seconds until the L...

Page 2: ...le processus de Liaison tapes 5 et 6 Gardez l metteur le plus pr s possible du moniteur pendant le processus de liaison 5 Appuyez et maintenez le bouton Linking sur le MONITEUR enfonc pour environ 5 s...