manualshive.com logo in svg

MTM 58SX, User Manual

Share
Download
MTM 58SX User Manual Download Page 31

Petrol Powered Chainsaws 

 

E&OE 

©2017 MTM 

31 

Cleaning Guidelines 

Do not use solvents, chemicals or abrasives when cleaning the machine, as some surfaces 
may be damaged. • Wear gloves or use suitable tools to assist in cleaning – do not use bare 

hands. • Clean the machine after every use to ensure best performance and longest service life. 

•

 

Use a slightly damp cloth and mild detergent for cleaning. 

•

 

Use a brush for parts that are difficult to reach. 

•

 

Ensure air vents and surfaces designed for heat dissipation are clean and free of obstructions or debris. 

•

 

Remove the drive chain cover and clean away any sawdust, wood particles, dirt etc from the clutch, 
chain brake and tension adjustment mechanism, chain bar and saw chain. 

•

 

It is recommended to lightly oil the saw chain after each use to help prevent corrosion. 

•

 

Ensure all guards and safety devices are clean and functioning correctly. 

•

 

Ensure that spring-loaded parts, such as the throttle, return to the normal position when released. 

•

 

Ensure that all control cables, levers, switches etc are clean and operate normally and smoothly. 

 

Transportation and Storage 

Always ensure that the machine is cool enough to touch before transporting or 
storing. 

• Petrol/fuel/gasoline is extremely flammable – keep clear of naked flames or 

other ignition sources. 

• Always transport the machine with the engine ON/OFF switch in the "OFF" position. 

• Drain the fuel tank before transportation or storage 

Preparing for Transport and Storage 

•

 

Clean the equipment before transport or storage.  

•

 

Ensure the engine is OFF and the chain brake is engaged, and the blade sheath is installed.  

•

 

Disconnect the spark plug lead. 

•

 

When transporting the machine in a vehicle, secure the machine in an upright position to prevent tip-
over, machine damage or fuel spills.  

•

 

Store the equipment in a dry, well-ventilated area and out of the reach of children. 

Long Term Storage 

•

 

Follow the normal procedures for storage, then: 

a.  Drain the fuel system. It is advised to have the fuel tank as empty as possible before draining. 

b.  Remove the spark plug and put 5ml of clean engine oil into the cylinder. Pull the starter cord slowly 

several times to distribute the oil. Re-install the spark plug. 

•

 

Cover the equipment to protect it. 

 

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM   MTM

Summary of Contents for 58SX





































Reviews:

No comments

Brands by name

Popular brands

Load more brands