2
From an armed state, place the user key over the RFID
icon to disarm the system. LED will be flashing red.
1
CX FLEX
™ SINGLE ALARM ONLY
PRODUCT MANUAL
5
MTI P/N 063-00306 rev 1 ©2019 MTI All Rights Reserved
www.mtigs.com | T:800.426.6844
1
2
3
DELETING WHITELIST
(This will delete all User Keys from the system.)
ADDING NEW USER KEYS
Hold down the Authorization Card
for 5 seconds, and a chirping
sound will start.
Place Authorization Card over the RFID icon. Follow Key
Whitelist process starting on page 3.
From an Armed state, place the
User Key over the RFID icon to
disarm the system. LED will be
flashing red.
Place the Authorization Card over
the RFID icon AGAIN during the
10 second chirp sequence.
If successful
unit beeps 2 times
and chirps stop
