S H O W E R B A S E
C L E A N I N G I N S T R U C T I O N S
The cross-linked cast acrylic surface of all MTI shower bases s is among the glossiest, highest
quality surfaces available. Its hard, non-porous surface prevents dirt from accumulating and resists
stains better than other materials. With normal use, cast acrylic will retain its beauty with only a
minimal amount of care. To maintain the high gloss, elegant look of the cast acrylic surface, follow
these simple steps:
Use common household,
non-abrasive
cleaners for most cleaning jobs (for example: a mild
dishwashing detergent such as Ivory Liquid). Follow manufacturer’s directions and precautions.
Do not use unless the product label specifically states that it is safe for acrylic.
Rinse well
and dry with a soft, clean cloth. Be sure to check the product label. Some products, although not
containing abrasives, WILL damage the acrylic over time.
Never use any type of “scrubbing
bubbles” or aerosol spray cleaners on your acrylic product unless it specifically states
that it is safe for use on acrylic!
Never use abrasive cleansers. If any product feels gritty when rubbed between your fingers, do
not use on the acrylic surface or controls as permanent damage will occur.
Do not allow your cast acrylic surface to come into contact with nail polish, nail polish remover,
Wintergreen oil, dry cleaning solution, lacquer thinners, gasoline, pine oil, etc.
Remove dust and dry dirt with a soft, damp cloth.
Clean grease, oil, paint or ink stains with isopropyl (rubbing) alcohol. Dry with a clean, soft cloth.
Avoid using razor blades or other sharp objects that might scratch the surface. Small scratches can
be removed by applying a thin coat of automotive polishing liquid and buffing lightly with a clean
cloth. For deeper scratches, sand the surface lightly with a 400 grit “wet or dry” paper and buff with a
fine grit buffing compound.
MTI strongly recommends a professional acrylic repair person for deep scratches or chips.
