MTI AUTOFRY Mini-C, Operator'S Manual

Page: 12 / 32

AutoFry
Mini- C Operator’s Manual
10
Mini-C OM 11/18 63-0114
12.
Install the Food Exit Chutes
•
Slide the food exit chutes, flange side up, through the
cutout on the side of the AutoFry and slip the flange
over the edge of the interior wall. Figure 11.
•
Repeat on both sides of the unit.
13.
Install the Teflon Cook Basket
•
Insert the flat end of the basket rod into the slot in the basket cam located on the back wall
of the cook chamber. Figure 12A.
•
Install the round end of the basket rod into the receiver clip on the inside front of the cook
chamber. Figure 12B.
IMPORTANT
The completed installation will have the basket positioned at an angle above the oil pot. Figure 13. This
is normal.
Do not force the basket down into the oil pot or
damage to the basket motor will result.
When adding oil, remove the Teflon cook baskets. Never
use the basket as a rest for the oil container.
14.
Power
•
Close and lock the main door.
•
Plug the AutoFry into the properly rated, grounded outlet.
You are now ready to start cooking!
Figure 11A
Figure 11B
Figure 12
Figure 10