MTI 829, User Manual

Page: 21 / 40

17
8 Program Buttons
(P1, P2, P3, P4) The Program Buttons move the chair to a user defined Program Position. NOTE: The chair has no
pre-existing Program Positions upon arrival and will only beep and not move until Program Positions
have been saved.
The Program Buttons have two button settings that can be changed by the user.
Momentary Button Setting: Press and release to automatically move the chair to the Program
Position. To save a Program Position, position the chair to the desired position then press and hold a
Program Button for 5 seconds. Chair will play a high-low-high tune after the position has been saved.
Maintain Button Setting:
Press and hold the button to move the chair to the Program Position.
To save a Program Position; position the chair to the desired position, press and release the Stop
Button twice, then hold the Program Button for 5 seconds. Chair will play a high-low-high tune after
the position has been saved.
9 On/Off Button Turns the chair on and off (Prevents accidental actuation of the chair).
10 LED Indicators Used to provide user feedback on conditions, inputs, and errors. Left to right are green, blue, and
orange LEDs.
FOOT EXTENSION SWITCHES
11 Foot Extend/Foot
Retract Buttons
Independently extends or retracts the foot section of the chair by pressing the desired direction.
NOTE: Footrest will not extend until foot has been raised at least 20° and moved away from Safe Zone
boundary. When foot is raised, footrest retraction is limited to prevent interference with seat.
NOTICE/AVIS
For additional safety, any button will stop all automatic motions except for the same button that was pressed to initiate movement.
Pour plus de sécurité, n’importe quel bouton peut arrêter tous les mouvements automatiques à l’exception du bouton même qui a été pressé
de commencer le mouvement.
NOTICE/AVIS
Swivel Button is present on all foot and hand controls. If the chair is a mobile or standard base chair, pressing the Swivel Button will act as a
stop button while the chair is moving.
Le bouton de pivotement est présent sur tous les commutateurs au pied et à main. Si la chaise est une chaise de base mobile ou standard,
appuyer sur le bouton de pivot agira comme un bouton d’arrêt pendant que la chaise bouge.
1
2
3
4
3
9
6
7
5
8
10
11
P1
P3
P4
P2
1 2 3 4
5
6
7
8
1 2 3 4