2
Instruction Guide | 325/326/327
INSTAllATION
Backrest Installation
(Model 326)
Body Support Installation
(Model 327)
Moving Body Support to left Hand Side
1
2
3
1. Insert the backrest into the
bracket on the underside of
the seat. Tighten in place
with the knob.
2. Attach the body support
tube to the bracket on the
underside of the seat with
(2) 1-1/2” flat head screws
using a 5/32” Allen wrench.
Insert the rod of the ratchet
assembly into the body
support tube with the flat
side towards the knob and
tighten it into place.
1. Remove the three bolts
that secure the body
support ratchet to the body
support cushion using a
3/16” Allen wrench.
2. Feel for 3 holes hidden
under upholstery on the
opposite side of the body
support cushion. Pierce
3 holes through the
upholstery using a sharp
instrument.
Moving Body Support to left Hand Side
3. Remove the top plate of
the ratchet assembly, held
with two screws, using a
phillips screwdriver. Remove
the black plastic washer. (It
may stick to the bottom of
the top plate).
4. Flip the ratchet lever over
and place it over the pin
and verify the end of the
spring is in the hole of the
ratchet lever..
5. Place the black plastic
washer over the pin and on
top of the ratchet lever and
reassemble the lid.
6. Reattach the body
support ratchet using the
3/16” Allen wrench.