4
2
3
SECURE PLUG
™
PRODUCT MANUAL
4
MTI P/N 063-00243 rev D ©2019 MTI All Rights Reserved
www.mobiletechinc.com | T:800.426.6844
INSTALLATION & SETUP
The Remote Access Module allows you to use the RFID cards
to control the Secure Plug when access to the unit is difficult.
1
Initial setup of Secure Plug requires linking an Authorization Card to it. Please swipe the Authorization Card you intend to
use for that strip throughout the life of the position. If this card is lost please contact Customer Service.
The system registration and key setup processes can be done on the Secure Plug unit or through the Remote Access Module.
DO NOT PLUG IN DEVICES BEFORE
LINKING AN AUTHORIZATION CARD.
IF USING THE REMOTE ACCESS MODULE:
Plug in to
the end of the Power Strip and affix to surface, if desired.
Plug Power Strip into a wall outlet.
FOR SCREW MOUNT (OPTIONAL):
Use three #6 (M3.5) wood screws (not included). Measure and install screws into
mounting surface leaving 1/4” (6.35mm) of the screw heads exposed. Align the Power Strip keyholes (circled in
blue
) and
hang onto the screws.
2.4 in
(62 mm)
7.9 in
(200 mm)
1.6 in
(42 mm)
-CONTROLLED DOCUMENT-
063-00243
D-0
Status: Approved
ECO-109326
ECO-109326
