MTD Leaf Collection System Manual Download Page 1

5

CONTENTS OF CARTON

42”/46” Leaf Collection System

Before beginning installation, remove all parts from the carton to make sure 
everything is present. Carton contents are listed below and shown in Figure 1. 
The hardware pack(s) included in this kit are detailed at the end of this section.
• 

Cart Collection Support Assembly - 689-02019

• 

Mesh Cover - 764-05215

• 

Bagger Chute - 731-09329A

• 

Bag Vent - 731-12351B

• 

Hose End - 731-12353A

• 

Hose - 764-05335

• 

Hardware Pack - 689-00636

50”/54” Leaf Collection System

Before beginning installation, remove all parts from the carton to make sure 
everything is present. Carton contents are listed below and shown in Figure 2. 
The hardware pack(s) included in this kit are detailed at the end of this section. 
• 

Cart Collection Support Assembly - 689-02019

• 

Mesh Cover - 764-05215

• 

Bagger Chute Assembly - 819-010964

• 

Bag Vent - 731-12351B

• 

Hose End - 731-12353A

• 

Hose - 764-05335

• 

Hardware Pack - 689-02199

U-Shape Tube

Adjustment

Tube

Upright Tube

Corner Tube

Top/Bottom

Stop Plate

Center Stop

Plate

Bag Vent

Mount Tube

Figure 1

 

Upright Tube

Corner Tube

U-Shape Tube

Adjustment

Tube

Top/Bottom

Stop Plate

Center Stop

Plate

Bag Vent

Mount Tube

Figure 2

 

Thank You

Thank you for purchasing this product. It was carefully engineered to provide excellent performance when properly operated and maintained. 

Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other persons who will 
operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage. 

All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment, its features and 
operation. Please be aware that this Operator’s Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be 
applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.

If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.

Throughout this manual, all references to 

right

 and 

left

 side of the machine are observed from the operating position.

Summary of Contents for Leaf Collection System







Reviews: