MST Impact NS5001, User Manual

Page: 105 / 118

Appendix
F
Connecting a PC to an ImPact Network Device
This Appendix specifies how to set up a PC connection (with Windows XP operating system) to connect
to an ImPact Wireless Network Switch or WAP.
1. Connect a PC to the device's Ethernet port with an Ethernet cable. If the PC is already part of the
network, note its TCP/IP configuration settings.
2. Click Start > Control Panel . Open Network Connections .
3. Right-click
Local Area Connection
and select
Properties
. The
Local Area Connection Properties
window will open.
NS50 User Guide 105 Revision C