MSI MS-9A76 Manual Download Page 70

Page: 70 / 88

3-12

BIOS Setup

MS-9A76

Boot

▶

CSM Support

This setting enables/disables the support for Compatibility Support Module, a

part of the Intel Platform Innovation Framework for EFI providing the capability to

support legacy BIOS interfaces.

Important

If the Operating System is going to boot in UEFI mode, disable CSM Support to

speed up the boot process.

▶

Video

This setting controls the execution of UEFI and Legacy Video OpROM.

▶

Boot Option Priorities

This setting allows users to set the sequence of boot devices where BIOS at-

tempts to load the disk operating system.

▶

Hard Drive BBS Priorities

This setting allows users to set the priority of the specified devices. First press

<Enter> to enter the sub-menu. Then you may use the arrow keys ( ↑↓ ) to select

the desired device, then press <+>, <-> or <PageUp>, <PageDown> key to move

it up/down in the priority list.

Summary of Contents for MS-9A76

























































































Search results

Summary of Contents for MS-9A76

Reviews:

MSI MS-9A76, Manual, Page: 70 / 88

Search results

Summary of Contents for MS-9A76

Reviews: