55
BIOS Item Contents
Power
▶
Restore AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
Leaves the computer in the power off state.
[Power On]
Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power failure or
interrupt occurred.
▶
Deep Sleep Mode
The setting enables/disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power, at a
minimum, to the power button to allow return to S0. A full reboot is required.
No previous content is retained. Other components may remain powered so the
computer can “wake” on input from the keyboard, clock, modem, LAN, or USB device.
** Advanced Resume Events Control **
▶
OnChip USB
The item allows the activity of the OnChip USB device to wake up the system from
S4/ S5 sleep state.
▶
PCIE PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE PME is detected.
▶
RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.