MSI MS-98I0 Manual Download Page 2

Page: 2 / 54

Preface

MS-98I0

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR IN-

TERNATIONAL. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

Revision History

Revision

Date

V1.0

2015/09

Technical Support

If a problem arises with your system and no solution can be obtained from the

user’s manual, please contact your place of purchase or local distributor. Alterna-

tively, please try the following help resources for further guidance.
Visit the MSI website for technical guide, BIOS updates, driver updates and other

information, or contact our technical staff via http://www.msi.com/support/

Summary of Contents for MS-98I0























































Search results

Summary of Contents for MS-98I0

Reviews:

Related manuals for MS-98I0

Brands by name

Popular brands

MSI MS-98I0, Manual

Search results

Summary of Contents for MS-98I0

Reviews:

Related manuals for MS-98I0

Brands by name

Popular brands