2-5
Hardware Setup
MS-98E1
5. Secure the load lever with the hook
under the retention tab.
6. Make sure the four hooks are in proper
position before you install the cooler.
Align the holes on the motherboard
with the cooler. Push down the cooler
until its four clips get wedged into the
holes of the motherboard.
7. Press the four hooks down to fasten
the cooler. Turn over the motherboard
to confirm that the clip-ends are
correctly inserted.
8. Finally, attach the CPU Fan cable
to the CPU fan connector on the
motherboard.
Important
•
Confirm if your CPU cooler is firmly installed before turning on your system.
•
Do not touch the CPU socket pins to avoid damage.
•
Whenever CPU is not installed, always protect your CPU socket pins with the plastic
cap covered.
•
Please refer to the documentation in the CPU cooler package for more details about
the CPU cooler installation.
•
Read the CPU status in BIOS.
