49
Upgrade MCU Firmware
Firmware of
MEGA VIEW 588
can be upgraded. Firmware is more like BIOS
of mainboard, it might let the hardware device work better. You need a computer
and the supplied USB cable for the following procedures:
Note: To prevent battery runs out while upgrading and causes system failure,
it is recommended to plug the AC Adaptor to provide electricity.
Note: If you need to update both firmware and software, update firmware first.
1.
Connect
MEGA VIEW 588
to your computer with the USB cable.
2.
Power on
MEGA VIEW 588
to initialize it on your computer.
3.
Download a
MEGA VIEW 588
upgrade file from internet and save it into
MEGA VIEW 588
root directory. Double click to run the upgrade file, and
select “
Replace all
” on pop-up message to replace old files.
4.
Safely remove
MEGA VIEW 588
from your computer.
5.
Select
Setting
from main menu and press down
Navigation key
to enter.
6.
Push
Navigation key
left or right to select
Info
tab.
7.
Push
Navigation key
up or down to select
Update Firmware
.
8.
Push
Navigation key
to the right. Message "
Update MCU Firmware? Yes
No
" will appear on the display.
9.
Push
Navigation key
right or left to select
Yes
and press
down
Navigation
key
to start to upgrade firmware. Or select
No
and enter to cancel upgrade.
10.
When firmware upgrade completes, system will restart.