MSI MEG Z690 UNIFY, Quick Start Manual, Page: 31 / 73

31
Overview of Components
DIMM Slots
Memory module installation recommendation
⚠
Important
∙ Always insert memory modules in the DIMMB1 slot first.
∙ To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
∙ Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
∙
It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
∙
The stability and compatibility of installed memory module depend on installed CPU
and devices when overclocking.
∙
Please refer to www.msi.com for more information on compatible memory.
DIMMA1 DIMMB1
Channel A Channel B
DIMMB1 DIMMA1
DIMMB1