42
UEFI BIOS
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
∙
Go to BIOS and press
F6
to load optimized defaults.
∙
Short the
Clear CMOS
jumper on the motherboard.
⚠
Important
Be sure the computer is off before clearing CMOS data. Please refer to the
Clear
CMOS
jumper section for resetting BIOS.
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1.
Insert the USB flash drive that contains the update file into the USB port.
2.
Please refer the following methods to enter flash mode.
▪
Reboot and press
Ctrl + F5
key during POST and click on
Yes
to reboot the
system.
Press <Ctrl+F5> to activate M-Flash for BIOS update.
▪
Reboot and press
Del
key during POST to enter BIOS. Click the
M-FLASH
button
and click on
Yes
to reboot the system.
3.
Select a BIOS file to perform the BIOS update process.
4.
When prompted, click on
Yes
to start recovering BIOS.
5.
After the flashing process is 100% completed, the system will reboot
automatically.
Summary of Contents for MAG B460M BAZOOKA
Page 3: ...3 Safety Information Installing a Processor https youtu be 4ce91YC3Oww 1 2 3 6 4 5 7 8 9 ...
Page 8: ...8 Safety Information Installing SATA Drives http youtu be RZsMpqxythc 1 2 3 4 5 ...
Page 9: ...9 Safety Information 1 Installing a Graphics Card http youtu be mG0GZpr9w_A 2 3 4 5 6 ...
Page 10: ...10 Safety Information Connecting Peripheral Devices ...
