6 |
P a g e
Machine Solutions Inc. 2951 W. Shamrell Blvd. Flagstaff, Arizona 86005 USA
Tel: 928.556.3109
•
Fax: 928.556.3084
•
www.machinesolutions.com
Note: This equipment is not for use in an ATEX environment.
Set Up and Configuration
Proper sizing of the
thermal nozzle
is crucial to the optimizing process and repeatability. The
following guidelines are recommended methods; however, all applications vary, and several
iterations of tooling process development may be required and may not follow all of the
recommended guidelines.
1.
Thermal Nozzle Diameter
- The nozzle diameter should be .187
”
- .25
” larger tha
n the
material to be processed.
2.
Thermal Nozzle Width
- The width of the thermal nozzle should be sized equal or
slightly greater (approximately 1.0mm) than the length of the overlap of the materials.
3.
System Options
–
Many optional accessories are available to enhance the functionality of the
system and improve process yield. Contact Beahm Designs sales department or visit our website
at
for more information on available accessories and/or to request
a quote.
System Controls and Features
Located on the front panel of the Hot Air System(s) are the following controls and/or displays
and their functions:
Figure 1.Standard Hot Air System (Model 160-A)
160-A only (Starter System)
Description
Function
Summary of Contents for BEAHM 160-A
Page 1: ......
