MSI 970A-G46 Series Manual Download Page 50

Page: 50 / 78

2-10

BIOS Setup

MS-7693

Chapter 2

BIOS Setup

MS-7693

Chapter 2

Important

Overclockng your PC manually s only recommended for advanced users.
Overclockng s not guaranteed, and f done mproperly, can vod your warranty or

severely damage your hardware.
If you are unfamlar wth overclockng, we advse you to use OC Gene for easy

overclockng.

Current CPU/ DRAM Frequency

These tems show the current clocks of CPU and Memory speed. Read-only.

Adjust CPU FSB Frequency

Ths tem s used to adjust the CPU FSB frequency (n MHz).

Adjust CPU Rato

Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the

processor supports ths functon.

Adjusted CPU Frequency

It shows the adjusted CPU frequency. Read-only.

Adjust CPU-NB Rato

Ths tem s used to adjust CPU-NB rato.

Adjusted CPU-NB Frequency

It shows the adjusted CPU-NB frequency. Read-only.

OC Gene Lte

Settng ths tem to [Enabled] allows the system to detect the maxmum FSB clock and

•
•

•

▶

Summary of Contents for 970A-G46 Series















































































Search results

Summary of Contents for 970A-G46 Series

Reviews:

Related manuals for 970A-G46 Series

Brands by name

Popular brands

MSI 970A-G46 Series, Manual

Search results

Summary of Contents for 970A-G46 Series

Reviews:

Related manuals for 970A-G46 Series

Brands by name

Popular brands