MSI 970A-G46 Series Manual Download Page 42

Page: 42 / 78

2-2

BIOS Setup

MS-7693

Chapter 2

BIOS Setup

MS-7693

Chapter 2

Enterng

Power on the computer and the system wll start the Power On Self Test (POST) pro-

cess. When the message below appears on the screen, please <DEL> key to enter

CLICK BIOS II:

Press DEL key to enter Setup Menu, F11 to enter Boot Menu

If the message dsappears before you respond and you stll need to enter CLICK BIOS

II, restart the system by turnng the computer OFF then back ON or pressng the RESET

button. You may also restart the system by smultaneously pressng <Ctrl>, <Alt>, and

<Delete> keys.

Important

The tems under each BIOS category descrbed n ths chapter are under contnuous

update for better system performance. Therefore, the descrpton may be slghtly dffer-

ent from the latest BIOS and should be held for reference only.

Overvew

After enterng CLICK BIOS II, the followng screen s dsplayed.

BIOS menu

selecton

Temperature

montor

System

nformaton

Boot devce

prorty bar

Menu dsplay

Boot menu

BIOS menu

selecton

Mode

selecton

Important

The pctures n ths gude are for reference only and may vary from the product you pur-

chased. Please refer to the actual screens of your system for detaled nformaton.

Temperature montor

Ths block shows the temperature of the processor and the manboard.

▶

Summary of Contents for 970A-G46 Series















































































Search results

Summary of Contents for 970A-G46 Series

Reviews:

Related manuals for 970A-G46 Series

Brands by name

Popular brands

MSI 970A-G46 Series, Manual

Search results

Summary of Contents for 970A-G46 Series

Reviews:

Related manuals for 970A-G46 Series

Brands by name

Popular brands