The MS021 package includes:
-MSG MS021 tester – 1 pc.;
-power cable – 1 pc.;
-diode fuse – (type: 5*20mm, current: 0.5A) – 1pc.;
-cable with a probe – 1 pc.,
-cable with a clamp – 1 pc.,
-User Manual – 1 pc.
Inspect MS021 tester. If any damage is detected, please contact the manufacturer or sales
representative before launching the equipment.
4
3. EQUIPMENT PACKAGE
4. TESTER DESCRIPTION
WARNING!
In case of obvious damage, the operation of the device is forbidden.
The device is supplied with a touch screen (“1” - Fig.1) which displays the tested parameters; the
color indication of the screen signals the technical condition of the tested diode. The tester has
two connection terminals (“2” - Fig.1) for diagnostic cables (Fig.2). Any connection configuration
of cables is allowable. The encoder knob (“3” – Fig.1) is used for fine adjustment of the device for
specific tasks. Button “4” turns the device on. Diode fuse and power connectors are located at the
rear of the device.
Fig.1 MS021 tester. General view:
1 – Touch screen; 2 – Connection terminals for diagnostic cables;
3 – Encoder button; 4 – “ON” button.
1
2
3
4
User Manual - MS021 Tester
English
