Store only undamaged respirators for further
use. When not in use, store the respirator in
cool, dry, and clean ambient air.
Do not distort the facepiece during storage.
When disposing of the respirator or its com-
ponents, do so in accordance with local,
state, and federal regulations.
Discard the canister/cartridge(s) if the origi-
nal bag or carton is opened or damaged.
For gas mask application only, see Storage
and Shelf Life information below.
Storage for CBRN Application Only
CBRN canisters must be stored in ONE of
the configurations listed:
• Canister must be stored in original,
unopened foil bag and in the extended
clamshell (P/N 10046578), or
• Canister must be stored in original,
unopened foil bag and in the original,
unopened carton.
Facepiece must be stored in the extended
clamshell (P/N 10046578).
The clamshell is provided as a convenient
storage container to protect the facepiece
and canister. Replace the clamshell if it
becomes damaged.
SHELF LIFE
Follow the shelf life expiration date stamped
on the carton, bag, and/or canister/car-
tridge(s) as applicable. The expiration date
will only apply if factory sealed and undam-
aged or the proper procedure is followed,
otherwise the canister must be discarded.
DO NOT use an expired canister/car-
tridge(s). Failure to follow this warning
can result in serious personal injury or
death.
Storage and Shelf Life for Canister Part
Numbers 10067469, 10059903, 10067469,
10067470, 10067491 are Stored Outside
the Original Foil Packaging:
These canisters have a 5 year shelf life with
the expiration date printed on the foil bag.
The canisters may be stored outside the
original factory packaging by using the fol-
lowing procedure:
Approved Storage Configurations Outside
the Original Foil Packaging
Storage using the supplied cap/plug
component
• Remove the canister from the box and
bag.
• Locate the white block on the canister
label.
• Mark on the canister, in the white block,
an expiration date of 1 year (for
formaldehyde canister an expiration date
of 6 months) from the date the canister
was removed from the packaging. This
expiration date must not to exceed the
original expiration date printed on the foil
packaging.
• Using the enclosed cap and plug assem-
bly as shown in Figure A, place the cap
end over the threaded outlet of the can-
ister as shown in Figure B.
• Insert the plug end on
the inlet of the canister
as shown in Figure C.
STORAGE
LVG 322 (L)
Rev. 1
3
- 10050775
27
Figure A
Figure B
Figure C
Summary of Contents for Ultra Elite P100
