Version 10.6.3
18
Marine automatic telephone system
ITS-1004
7.3.3
Auto redial
If a user line is busy or there is no answer:
1.
Press button [REPEAT].
2.
Put a receiver down.
3.
The System will automatically redial number in a specified time interval
specified number of times. Redial timer and number of attempts are set at order on Customer
request. Auto redial lasts 3 minutes by default.
4.
After answer pick up the receiver.
5.
Speak.
Use speakerphone or connected headset for communication (if specified options
are available).
7.3.4
Manual call forwarding
To ensure this function:
1.
Press [HOLD] during incoming call.
2.
After the start dialing signal (tone), dial user number where you are going to
forward the call.
3.
Put the receiver down.
7.3.5
Number repetition
To repeat the last number redial:
1.
Pick up the receiver.
2.
Enter code of last number recall «552» or (if available) press [CALL REPEAT].
7.3.6
Conference among internal users with sequential add-on of participants (max. 15)
Only three-way conference is available for analog UTs.
To create a conference:
1.Make a call.
2.During conversation with the first participant press [HOLD].
3.After the start dialing signal (tone), make a call to the second participant (not later
than in 2 seconds).
4.During conversation with the second participant press twice [HOLD].
All users may participate in conference.
