G1 Facepiece
16
Spectacle Kit
GB
4
Spectacle Kit
WARNING!
Before using a spectacle kit, an optometrist must examine the spectacle kit and prescribe the correct
lenses to fit into the lens frame on the spectacle kit.
Failure to obey this warning can result in serious injury or death.
(1)
Flip the head harness over the front of the mask so the
harness is covering the lens of the mask.
This will open up the faceblank to make it easier to
install the spectacle kit.
(2)
Squeeze in on the wire frame of the spectacle kit at the
large bends about 5 cm from the ends.
Do not overbend the wire.
(3)
Push the top part of the frame into the lens. The face-
blank has three rubber tabs to grab the frame.
a) Place the frame in the middle of the lens with the
smaller tabs grabbing the wire frame.
