mru SWG100 CEM, User Manual, Page: 87 / 155

MRU GmbH SWG 100 User Manual
Page 87 of 155
8.10. Administrator PIN code
All functions and menus which may disturb the analyzer's normal measurement can be
protected against unauthorized access by activating the administrator PIN code request.
We highly recommend activating this function, when unauthorized persons could access the
analyzer.
The PIN code is: F1 - F1 - F3 - F2 - Up - Down
The PIN code request can be activated and deactivated in the menu Extras/General settings:
The deactivation of the PIN code request requires at least one time PIN code input.
Once the user has input the correct administrator PIN code the analyzer will stay in
administrator mode (password free) for 10min after last time key acting. Each key acting will
trigger another 10min password free operation.
8.11. Power-On of analyzer
When the analyzer is connected with mains (Power-On) it will start the system boot process
which usually takes very few seconds. Then the display will show the self-test menu.