USER MANUAL DM9600
MRU GmbH, D-74172 Neckarsulm
24 / 57
7.3.
Performing pressure measurement
Press Pressure measurement to enter this menu.
On the first page of the pressure measurement 4 pressure values can be
recorded.
The current displayed pressure value can be assigned and saved to one
of the 4 available spots.
The adjustments are done in the context menu.
The hose (e.g. draft measurement) will be connected to the draft port
P1.
For differential pressure measurements, a second hose will be connect-
ed to the P2 port.
On the second page, the pressure flow is visualized in a graph. The
pressure can be Auto-logged (see Auto-Log function). When saving re-
sults, the max and min values are saved as well as the pressure average.
.
ATTENTION
If the measuring range is exceeded positive-
ly/negatively, the pressure sensor will be destroyed.
Therefore the following message is displayed as a
warning:
Fault message
„
Pressure too high
“.
There will also be an additional acoustic warn signal
