MRMC MRMC-2092-00, Quick Start Manual, Page: 6 / 32

TX90L Model Mover Quick Start Guide
2
Safety procedures for using industrial robots
Note that the words Robot and Rig are completely interchangeable and
identical in meaning, for the purposes of this document.
Motion Control rigs are potentially dangerous. It is important that you
and everyone else on the set understand the safety notes on the following
pages in order to stay safe.
You should use this document in addition to the normal Safety Manual
instructions that are applicable to all motion control rigs, such as Milos.
This section emphasises the safety concerns that are especially important
around high-speed, high-acceleration, industrial-grade robots which can
cause severe injuries, such as TX90L Model Mover.

Unlike traditional motion control equipment, TX90L Model
Mover can get to maximum speed in the blink of an eye - too
fast for someone to be able to quickly move out of the way.

It is ultimately the operator of the rig who is responsible for
the safe use of the equipment so never bypass any of the safety
points listed here.

No one other than a highly trained operator should use the
robot, no matter how simple it looks or is.

This document is for the use of robots for carrying cameras or
props, not people.