TX90L Model Mover Quick Start Guide
10
Starting up the TX90L Model Mover system
Once you have attached all the cables, you power up the rig by switching
on the components in the order described below.
1.
Make sure you have secured the area around TX90L
Model Mover. Put up guard rails around TX90L
Model Mover as necessary, and tell others on the set
that you are now powering up the rig.
2.
Power up TX90L Model Mover as follows:
The TX90L Model Mover power-up sequence takes about three
minutes.
Turn on the power switch
on the Stäubli CS8.
Summary of Contents for MRMC-2092-00
