Polymotion Player Quick Start Guide
15
6.4 Click/tap
the
Tracking
drop-down box to specify the tracking
data:
Source
: Select whether source of tracking is
Manual
,
Tracab
or
None
if this is a non-tracking head. You can change the
source at a later point.
For
Manual Tracking
:
–
Select the
User
to be assigned as the
operator
for the
robotic head.
For Tracab:
–
Enter the
IP address (Source)
is the IP address of the
server running TDCGraphics. (This could be the same
server computer or the TRACAB server depending on
where the TDCGraphics is installed.)
–
Port (Signal)
is same as the
OutSignalPort
field in the
TDCGraphics software.