Quad Box Quick Start Guide
2
Quad box connector summary
1-4.
#1 - #4
identical connectors for any stepper motors, such as
PAN
and
TILT
in the head, track motors, and external Lens Control
Motors. For pin-out information see
5.
POWER 18-36V
connector, for power input for the head.
When the power is on, the LED next to the
POWER
connector lights up. For pin-out information see
6.
DATA
connector. This is a Serial RS232 connector, for connection to
a controller using a Serial RS232 connection (as an alternative to an
Ethernet connection), and for updating the firmware in the Quad
box. For pin-out information see
1
2
3
4
5
6
7
Quad box front
8
Quad box rear:
Power
LED
Summary of Contents for MRMC-1120-02
Page 1: ...Quad Box Quick Start Guide QSG Product Code MRMC 2020 00 Product Covered MRMC 1120 02 ...
Page 4: ...Quad Box Quick Start Guide iv ...
Page 14: ...Quad Box Quick Start Guide 10 Notes ...
Page 18: ...Quad Box Quick Start Guide 14 Notes ...
