Bolt™ Jr+ Quick Start Guide
34
Appendix
1
Bolt™ Jr+ panels
Bolt™ Jr+ Track Base panel connector summary
1.
240V AC
output, for general use by additional devices that you want
to mount on the base.
2.
VIDEO 1 IN
input connector for the video 1 signal from the camera.
This has a straight-through internal connection to the
VIDEO 1
OUT
connector (6).
3.
VIDEO 2 IN
connector for the video 2 signal from the camera. This
has a straight-through connection to the
VIDEO 2 OUT
connector
(7).
4, 8.
ETHERNET
connectors for communications between multiple
Ethernet devices on the rig. These two connectors share a common
Ethernet hub within the Bolt Jr+ Base. You ordinarily attach one of
these to the computer stack (via the umbilical cable) and one to
Ethernet connector on the base of the arm to service the Ulti-box
mounted on the arm.
5.
48V OUT
power connector. You usually use this to power the
Ulti-box (and its attachments) on the Bolt Jr+ arm.
4
3
2
1
5
8
7
6
9
10
Summary of Contents for CINEBOT Bolt Jr+
