LFP Quick Start Guide
78
Power In connector
Power to supply the LFP and the power output connector. The LFP can
run from 12-35 Volts DC.
1.
GND
2.
24VIN
3.
N/C
Power Out connector
1.
GND
2.
24VOUT
3.
N/C
Hint
It is recommended that you
do not
use the
POWER OUT
socket on
the LFP to power the head if you are using an Ethernet connection to
the head. If you do so then powering up the LFP will simultaneously
power up the head, and in this instance powering up two Ethernet
devices at the same time on the same network can cause
communication problems between them.
2
1
3
1
2
3
Summary of Contents for LFP
Page 89: ...LFP Quick Start Guide 85 Notes...
Page 90: ...LFP Quick Start Guide 86 Notes...
Page 91: ...LFP Quick Start Guide 87 Notes...
