LFP Quick Start Guide
8
Setting the control directions
In the LFP you need to specify the directions of the focus, zoom and
joystick controls for your particular head, lens gearing attachments, and
preference. For example, some people prefer the camera to point upward
when the joystick is pulled back, while others prefer the opposite logic
whereby pushing forward (“up”) on the joystick targets the camera
upward in the scene. To set the control directions you use the procedure
below.
1.
On the LFP, use the
SELECT
knob (rotate and press) to choose the
menu sequence:
SET DIRECTION
(if you are in Broadcast mode)
or...
GENERAL SETUP
>
SET DIRECTION
(if you are in Film mode)
2.
Set each sub-option to
FWD
(forward) or
REV
(reverse) as you prefer.
Test each control after you set it.
Menu option
Description
JOY HORIZ
Joystick controls - three directions
JOY VERT
JOY ROTATE
FOCUS CON
Focus control.
ZOOM CON
Zoom control. Make sure the
T
on the
LFP zoom control zooms in, and the
W
zooms out.
Summary of Contents for LFP
Page 89: ...LFP Quick Start Guide 85 Notes...
Page 90: ...LFP Quick Start Guide 86 Notes...
Page 91: ...LFP Quick Start Guide 87 Notes...
