MRC LCEN-401P User Manual Download Page 20

LCEN-401P

18 

14.2 Disposal 

Before  disposal,  the device must  be  decontaminated  and  cleaned  to  protect  people,  the  environment  and 

property. When you are disposing of the device, the respective statutory rules must be observed. 

Pursuant to guideline 2002/96/EC (WEEE), all devices supplied after August 13,2005 may not be disposed 

as  part  of  domestic  waste.  The  device  belongs  to  group  8  (medical  devices)  and  is  categorized  in  the 

business-to-business field. 

The icon of the crossed-out trash can shows that the device may not be disposed as part of domestic waste. 

The  waste  disposal  guidelines  of  the  individual  EC  countries  might  vary.  If  necessary,  contact  your 

supplier. 

15

Warranty 

15.1 Warranty of centrifuge 

This centrifuge is guaranteed for two years from the date of delivery provided that it has been operated and 

maintained properly, normally the centrifuge can work five years without problem.   

15.2 Warranty of the rotor 

Plastic  rotor  lifetime  is  usually  3  years  and  we  offer  3  years  warranty  from  the  date  of  delivery  upon 

manufacturer. Please pay attention, do not use the rotor once it has been corrosion or fatigue damage. The 

warranties  of the  centrifuge and the rotor  become invalid  in the case of  the following conditions even  if 

within the guarantee period expires: 

(1)

Failures caused by incorrect installation.

(2)

Failures caused by rough or improper handling.

(3)

Failures caused by conveyance or relocation after installation.

(4)

Failures caused by unauthorized disassembly or modification.

(5)

Failures caused by using non-standard spare parts or accessories and unauthorized modification of

the rotor or centrifuge.

(6)

Failures caused by natural disasters including fire, earthquakes and so on.

(7)

Consumables and parts have a limited guarantee period.

After-sales service 

In  order  to  ensure  to  operate  centrifuge  safely  and efficiently,  it  is  necessary  for  regular  maintenance.  If 

centrifuge has problems, do not attempt to repair it by yourself. Contact our sales or service center. 

Summary of Contents for LCEN-401P





















Reviews: