MRC IR-CAM-160, Operation Manual

Page: 29 / 77

Area (Rect) Measure Attribute
Press Hotkey button until area rectangle is flashing in yellow.
Press OK button to enter Attribute Menu in which four parameters
can be adjusted namely: emissivity, set reference, measure type,
move /size.
Area (Rect) Measure Attribute
Emissivity: Refer to Appendix: Emissivity of raw materials .
Set Reference: Set current area as reference. If selected, all
measure result will be relative value to this temperature.
Measure Type: Select from max, min, and average.
Adjust: Adjust rectangle position and size.
Parameters
24
Change different settings to adjust temperature measurement
accuracy. Press
▲
and
▼
button to select different parameters,
and press
▲
and
▼
button to change value.