MRC IR-CAM-160, Operation Manual

Page: 14 / 77

4.2 Measure Target Temperature
1. Point device to measurement target, and adjust to correct
focus. On the upper-right LCD corner, *=×× displays the
spot measurement result. For better accuracy, long press OK
button to perform manual rectify.
2. Select Area (Rect) Measurement to measure max, min, and
average temperature within a rectangle box.
3. It is recommended to press
▲
button to freeze thermal image
first, and then apply different and detailed analysis. Press
▲
button one more time to unfreeze.
4. Press
▲
button or
▼
button to switch between normal and 2X
zoom. Upper-left LCD corner displays ×2 when in 2X zoom.
5. When measure result is outside temperature range, screen
display changes to indicate either below or above
temperature range.
4.3 Infrared Image and Voice Annotation
Each thermal image can save up to 40 seconds voice annotation
data. Image and voice annotation can later be reviewed on PC by
bundled IR Analysis software. To save Infrared image, first press
▲
button to freeze image, and then long press
▲
button again to
open the voice recording menu. If only needs store Infrared image,
select Cancel, otherwise select Record. Press OK button to
confirm.
In main menu, File

Save provides the same function.

: Select Cancel during voice recording to exit.
9