7
1.3 Precautions before Installation
Please note the following points
：
•
Please choose the ground, wall structure which can withstand the weight of the equipment, the
plane of the installation site should be flat.
•
The equipment is prohibited to use in the following places: dust, oil mist, chemical corrosion
and other harsh places.
•
Dispensing booth should be without explosion-proof device, flammable, explosive items are
prohibited to be placed into the cabinet for weighing.
•
To rinse with water is prohibited, so as not to damage the electrical components of the
equipment or cause personal injury. Alcohol, stainless steel cleaner can be used to clean the
equipment regularly.
•
The dispensing booth should be placed in a well ventilated room.
1.4 Machine Installation Placement and Use Environment
Installation Position
Installation position of dispensing booth should be avoided to face road and sites people frequently
go through, avoidedto clogwindows and places where ventilation and lighting are not good,
avoidedto block the entrance and exit and place where the open or close of the door is affected ,and
avoided to place oppositely or in the corner of the wall.
At least 400mm must be left in each side of the dispensing booth for the purpose of installation and
check.
Use ambient: (1) For indoor use only;
(2) Ambient temperature
：
15℃
～
35℃
；
(3) Relative humidity
：
≤75%
；
(4) Atmospheric pressure range
：
70 kPa
～
106 kPa
；
(5) Power requirement
：
The voltage required by the power are the same with the rated voltage
required by the technical parameters
（
as is shown in Table 2.1.4
）
；
(6) Use a multimeter to test the voltage of the live line to ground and the voltage of the null line to
ground respectively, among which, the voltage of the live line to ground should be the grid power,
and the voltage of the null line to ground should be 0, otherwise, the power is not grounded well).
1.5 Installation
Remove
all
packaging
components
Check
whether
the
outer
surface
of
the
host
has
scratches,
deformations
or
foreign
objects
Check
carefully
the
accessories
and
information
by
referring
to
the
packing
list
in
the
operating
manual
Move
the
entire
equipment
to
a
site
which
is
as
close
as
possible
to
the
position
where
the
equipment
is
placed
finally
and
convenient
for
installation
(Field
installation
(take
FH
-24
-DB
dispensing
boothas
an
example
