MR TRAFOGUARD ISM, Operating Instructions Manual

Page: 152 / 224

6 Functions and settings
Maschinenfabrik Reinhausen GmbH 2016 152 5163667/00 EN TRAFOGUARD® ISM®
You can change the measured value display to the generator sign conven-
tion by activating the Retrofit TAPCON® 2xx [
► 113] parameter.
Displaying current measured values
The current measured values can be displayed in the measured value
screen. The following measured values are displayed:
▪
Voltage
▪ Current
▪ Power factor (cos ϕ)
▪ Frequency
▪ Reactive power
▪ Active power
▪ Apparent power
Figure 118: Measured values
To display the current measured values, proceed as follows:
► Go to
Measured values .
Displaying measured value recorder (optional)
You can use the optional measured value recorder function to display the
progress of measured values and signals.
Depending on device configuration, you can select the following measured
values and signals for the display:
Signal Description
P_m L1 Active power L1 (average value)
P_m L2 Active power L2 (average value)
6.21.1
6.21.2