manualshive.com logo in svg

MR TAPMOTION ED 100-S/L, Operating Instructions Manual, Page: 44 / 64

Share
Download
MR TAPMOTION ED 100-S/L Operating Instructions Manual Download Page 44

7 Operation

Maschinenfabrik Reinhausen GmbH 2020

44

1800138/08 EN

TAPMOTION

®

 ED

Operation

 

Operating the motor-drive unit remotely

Operate the motor-drive unit remotely during normal operation.

You can do this with a single control pulse, e.g. using a voltage regulator of
the TAPCON® series.

This operation is always completed regardless of any other control pulses
emitted during the tap-change operation. In the standard design, the next
tap-change operation can only proceed once all control devices have
reached their resting positions.

Behavior in the event of a voltage interruption

If the voltage is interrupted during a tap-change operation, the motor-drive
unit will complete the started tap-change operation once the voltage supply
returns.

Operating motor-drive unit locally

In special operating cases (such as during maintenance tasks) the motor-
drive unit can also be operated electrically on site via control switch S3.

In exceptional cases, the unit can be operated using a hand crank. You will
find more information in the following section.

7

7.1

7.2

Summary of Contents for TAPMOTION ED 100-S/L

































































Reviews:

No comments