7 Functions and settings
Maschinenfabrik Reinhausen 2014
143
222/08 EN
TAPCON® 240
Displaying measured value memory
As an option, the device can be equipped with a long-term memory module.
You can display information about the memory in this window.
To display the measured value memory, proceed as follows:
► Press
>
Info >
until the desired measurement parameter
is displayed.
ð
MEASURED VALUE MEMORY
Displaying peak memory
This display shows the minimum and maximum voltage measured since the
last reset and the minimum and maximum on-load tap-changer tap positions.
All values recorded are stored with a time and date.
The minimum and maximum values continue to be stored in an internal
fixed value memory even in the event of power failure.
Figure 106: Peak memory
1
Maximum measured voltage
U1
5
Time (HH:MM:SS) and date
(DD.MM.YY) of minimum re-
corded tap position
2
Maximum on-load tap-chang-
er tap position
6
Time (HH:MM:SS) and date
(DD.MM.YY) of minimum
measured voltage U1
3
Time (HH:MM:SS) and date
(DD.MM.YY) of maximum
measured voltage U1
7
Minimum on-load tap-changer
tap position
4
Time (HH:MM:SS) and date
(DD.MM.YY) of maximum re-
corded tap position
8
Minimum measured voltage
U1
To display the peak memory, proceed as follows:
7.16.10
7.16.11
Summary of Contents for tapcon 240
Page 1: ...Voltage Regulator TAPCON 240 Operating Instructions 222 08 EN ...
Page 173: ......
