MR RS 2001 Page 5 Operating Instructions Manual Download

Page: 5 / 52

1 Introduction

Maschinenfabrik Reinhausen GmbH 2018

1800059/09 EN

1 Introduction

This technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning and monitoring of the product.

It also includes safety instructions and general information about the prod-
uct.

This technical file is intended solely for specially trained and authorized per-
sonnel.

1.1 Validity

This technical file applies to the following types of the protective relay:

▪ RS 2001 (standard design)

▪ RS 2001/V (seals made from Viton)

▪ RS 2001/H (for high oil conservators)

▪ RS 2001/E (increased protection from vibration)

▪ RS 2001/R (extra inspection window)

▪ RS 2003 (design for Canada)

▪ RS 2004 (design for Canada with automatic reset)

1.2 Manufacturer

The product is manufactured by:

Maschinenfabrik Reinhausen GmbH

Falkensteinstraße 8
93059 Regensburg, Germany
Tel.: (+49) 9 41/40 90-0
Fax: (+49) 9 41/40 90-7001
E-mail: [email protected]

Further information on the product and copies of this technical file are avail-
able from this address if required.

1.3 Subject to change without notice

The information contained in this technical file comprises the technical speci-
fications approved at the time of printing. Significant modifications will be in-
cluded in a new edition of the technical file.

The document number and version number of this technical file are shown in
the footer.

1.4 Completeness

This technical file is incomplete without the supporting documents.

Summary of Contents for RS 2001





















































Search results

Summary of Contents for RS 2001

Reviews:

Related manuals for RS 2001

Brands by name

Popular brands

MR RS 2001, Operating Instructions Manual

Search results

Summary of Contents for RS 2001

Reviews:

Related manuals for RS 2001

Brands by name

Popular brands