
3 Product description
Maschinenfabrik Reinhausen GmbH 2015
18
4427410/00 EN
OILTAP® R
Figure 1: System overview of on-load tap-changer transformer
1
Transformer tank
6
Gear unit
2
Motor-drive unit
7
On-load tap-changer
3
Vertical drive shaft
8
Protective relay
4
Bevel gear
9
Oil conservator
5
Horizontal drive shaft
10
Active part
Setup/versions
The on-load tap-changer consists of the on-load tap-changer head, oil com-
partment with built-in diverter switch insert, and the tap selector mounted be-
low (also available with change-over selector on request).
The design and designation of the most important on-load tap-changer com-
ponents are shown in the installation drawings in the appendix.
For the number of maximum operating positions of the on-load tap-changer,
refer to the technical data.
3.2.2
Summary of Contents for OILTAP R
Page 1: ...On Load Tap Changer OILTAP R Installation and Commissioning Instructions 4427410 00 EN ...
Page 204: ......
Page 205: ......