MR OILTAP R, Installation And Commissioning Instructions, Page: 14 / 206

2 Safety
Maschinenfabrik Reinhausen GmbH 2015 14 4427410/00 EN OILTAP® R
▪ The product is only used when in a sound operational condition and
safety equipment in particular is checked regularly for operational relia-
bility.
▪ Only replacement parts, lubricants and auxiliary materials which are au-
thorized by the manufacturer are used.
▪ The specified operating conditions and requirements of the installation
location are complied with.
▪ All necessary devices and personal protective equipment for the specific
activity are made available.
▪ The prescribed maintenance intervals and the relevant regulations are
complied with.
▪ Installation, electrical connection and commissioning of the product may
only be carried out by qualified and trained personnel in accordance
with this technical file.
▪ The operator must ensure appropriate use of the product.
Personal protective equipment
Personal protective equipment must be worn during work to minimize risks to
health.
▪
Always wear the personal protective equipment required for the job at
hand.
▪ Follow information about personal protective equipment provided in the
work area.
Always wear
Protective clothing
Close-fitting work clothing with a low
breaking strength, with tight sleeves and
with no protruding parts. It mainly serves
to protect the wearer against being caught
by moving machine parts.
Do not wear any rings, necklaces or other
jewelry.
Safety shoes
To protect against falling heavy objects
and slipping on slippery surfaces.
Table 4: Personal protective equipment to be worn at all times
2.6