4 Packaging, transport and storage
28
BA5831400-00 EN
4.5 Storage of shipments
When selecting and setting up the storage location, ensure the following:
▪ Store the product and accessories in the original packaging until installa-
tion.
▪ Protect stored goods against moisture (rain, flooding, water from melting
snow and ice), dirt, pests such as rats, mice, termites etc. and against
unauthorized access.
▪ Store crates and boxes on pallets, timber beams or planks as protection
against ground moisture and for improved ventilation.
▪ Ensure that the foundation has sufficient load-bearing capacity.
▪ Keep entrance paths clear.
▪ Check the stored goods at regular intervals. Also take appropriate action
after storms, heavy rain or snow etc.
4.6 Further transport
Use the original product packaging for further transport.
If you transport the product to the final installation site in a mounted state,
observe the following information in order to protect the product against me-
chanical damage due to external influences.
Transport packaging requirements
▪ Select packaging suitable for the duration of transport or storage, taking
the climatic conditions into consideration.
▪ Ensure that the packaging protects the product against transport stress
such as shaking, vibrations and impacts.
▪ Ensure that the packaging protects the product against moisture such as
rain, snow and condensation.
▪ Ensure that the packaging allows for sufficient air circulation in order to
prevent the formation of condensation.
Summary of Contents for MESSKO MT-ST Compact
Page 25: ...3 Product description 25 BA5831400 00 EN 3 6 Nameplate Figure 9 Nameplate ...
Page 78: ...8 Disposal 78 BA5831400 00 EN Observe the national disposal regulations in the country of use ...
Page 90: ...10 Appendix 90 BA5831400 00 EN NPT adapters optional Figure 73 NPT adapters 1 2 NPT 3 4 NPT ...
Page 91: ......
