MR MControl 10, Operating Instructions Manual

Page: 31 / 62

6 Mounting
31 5809776/02 EN
Mounting in a control panel
The device can be mounted in a control panel using tension clamps. The
recommended wall thickness is 2...5 mm. To mount the device, proceed as
follows:
1. Produce the cut-out in the control panel.
Figure 8: Producing the cut-out in the control panel
MControl 7" A = 197 mm, B = 141 mm
MControl 10" A = 283 mm, B = 210 mm
2. Insert the device into the cut-out from the front.