MR ETOS TD, Operating Instructions Manual

Page: 248 / 356

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 248 4453918/14 EN ETOS
®
TD
Number of data bits
You can use this parameter to set the number of databits.
Number of stop bits
You can use this parameter to set the number of stop bits.
Parity
You can use this parameter to set the parity. You can select the following
options:
▪ None
▪ Even
▪ Odd
Query rate
This parameter lets you set the minimum time interval to be used to query
the sensors.
Send delay time
This parameter lets you set the period that the device is to wait between the
response of one sensor and the query of another sensor.
9.28.2 Managing sensors
This menu lets you manage sensors connected to the device over the MR
sensor bus. The following information is displayed:
▪ Sensor name
▪ Sensor version
▪ Sensor manufacturer
▪ Sensor Modbus address
▪ Status
– Blue: The sensor is connected to the sensor bus
– Red: The sensor is not connected to the sensor bus