MR ECOTAP VPD CONTROL PRO, Operating Instructions Manual

Page: 172 / 192

8 Operation
Maschinenfabrik Reinhausen GmbH 2018 172 5252433/02 EN ECOTAP
®
VPD
®
CONTROL PRO
Parameters Description
Target-tap-position operation If the assigned event is active, the device
switches to the defined target tap posi-
tion.
Activate desired value 1 If the assigned event is active, the device
activates desired value 1.
Activate desired value 2 If the assigned event is active, the device
activates desired value 2.
Activate desired value 3 If the assigned event is active, the device
activates desired value 3.
Activate desired value 4 If the assigned event is active, the device
activates desired value 4.
Activate desired value 5 If the assigned event is active, the device
activates desired value 5.
Increase desired value If the assigned event is active, the device
prompts an increase in the desired
value.
Decrease desired value If the assigned event is active, the device
prompts a decrease in the desired value.
Table 62: Functions available
Figure 108: Linking functions
In order to establish the link, you have to enter the corresponding event
number in the desired parameter.
Note that you can only enter the event numbers of the Generic SCADA
command events.
If you enter event number 500, the link is disabled.